Using the Set 860
20 | Set 860
Switching the wireless headphone system off
b Take the stethoset receiver off so that the ear bows fold
inwards.
The stethoset receiver automatically switches off after 20
seconds. The transmitter automatically switches off
(standby) when there is no stethoset receiver connected.
The
Transmitter status
LED goes off.
b Always store the stethoset receiver in the transmitter’s
charging compartment to ensure that it is fully charged
when needed.
The charging process starts (see page 15).
* LED goes off
To disconnect the transmitter from the power supply system
(e.g. when you are on holiday):
b Unplug the power supply unit from the wall socket.
If the stethoset receiver is outside the transmission range
for more than 5 minutes or if the transmitter receives no
audio signal for more than 30 minutes, the wireless head-
phone system switches off automatically (standby).
To Next Page
Loading...
