Using the Set 860
Set 860 | 23
Adjusting the balance
The balance buttons allow for left/right volume adjustment.
Adjust the balance so that you hear equally well with both
ears.
b Press the balance button R (right) or L (left) on the transmit-
ter to gradually increase or reduce the volume for your right
or left ear.
When the minimum or maximum balance setting is
reached, you hear a beep via the receiver.
To reset the balance setting to the middle setting:
b Simultaneously press the balance buttons R (right) and L
(left) on the transmitter for 3 seconds.
The balance setting is stored on the stethoset receiver. If
you are using several receivers with a transmitter, the
respective receivers are optimally adjusted to match the
personal hearing preferences of the users (e.g. you and
your partner).
Please note that the personal hearing preferences can
only be adjusted when only stethoset receiver is con-
nected to the transmitter.
You can switch your headphone system from stereo to
mono in order to be able to hear all details on either the
right or left ear (see page 34).
To prevent accidental adjustment of the balance set-
tings, you can activate the settings protection function
(see page 37).
BALANCE
L
To Next Page
Loading...
