Sennheiser Set 860 - Page 43

If a problem occurs ...
Set 860 | 43
If a problem occurs that is not listed in the above table or if the
problem cannot be solved with the proposed solutions, visit
the Set
860 product page at www.sennheiser-hearing.com.
There you will find a current list of frequently asked questions
(FAQ).
You can also contact your Sonova Consumer Hearing partner
for assistance. You can find your local Sonova Consumer Hear
-
ing partner at www.sennheiser-hearing.com/service-support.
The stethoset
receiver does
not connect to
the transmitter
The stethoset receiver is not
paired with the transmitter.
Pair the stethoset receiver with the
transmitter.
32
The distance to the transmitter
is too large.
Reduce the distance between the
stethoset receiver and the trans-
mitter.
–
4 stethoset receivers are cur-
rently connected to the trans-
mitter.
Up to 4 stethoset receivers can be
simultaneously used with the
transmitter.
–
Problem Possible cause Possible solution Page