Sensaphone 800 - Appendix E: Specifications; Alert Zones; Phone Interface; Led Indicator

129
Appendix E: Specifications
Alert Zones
Number of ZonesTHERMISTORINSTALLEDONZONEFORLOCAL
TEMPERATUREMONITORING
:ONE#ONNECTOR: terminal block
Zone Types./.#CONTACT+THERMISTOR&TO
&OR#TO#
:ONE#HARACTERISTICS+TO63HORTCIRCUITCURRENT
M!MAX
!$#ONVERTER2ESOLUTION: 10 bits ±2 LSB
:ONE0ROTECTION6$#-ETAL/XIDE6ARISTORWITHFASTACTING
diode clamps.
Microphone
)NTERNAL%LECTRET#ONDENSER&ORLISTENINGINTOONSITESOUNDS
and detecting high sound levels.
Phone Interface
,INE2**ACK&ORCONNECTIONTOATWOWIREANALOGTELEPHONE
LINEMODULARCORDINCLUDED
%XTENSION2**ACKW,INE3EIZURE&ORCONNECTINGOTHER
DEVICESONTHESAMETELEPHONELINEDEVICESCONNECTEDTOTHISJACK
are disconnected in the event that the 800 must dial out for an
alarm.
0HONE,INE0ROTECTION-ETAL/XIDE6ARISTORSELFRESETTING
fuse
LED Indicator
System On/NSTEADYWHENTHEUNITISIN25.MODE,%$
BLINKSONCEEVERYFEWSECONDSWHILEIN34!.$"9MODE
Phone In Use: On steady when the telephone line is being used.
LED blinks when no dial tone is detected. Off when telephone
line is not in use.