Sensaphone 800 - Page 50

Chapter 4: Communications Programming
49
7RQHRU3XOVH'LDOLQJ
4HE-ODELCANDIALOUTINPULSEOR4OUCH4ONE3ELECTTHE
type of dialing, in either pulse or tone, depending upon the type of
SERVICEPROVIDEDBYYOURTELEPHONECOMPANY4HEDEFAULTISTONE
4OPROGRAMFOREITHERPULSEORTONE
0RESSTHE3%.3/2/./&&KEY
SENSOR
ON/OFF
0RESS0(/.%.5-"%240
PHONE
NUMBER
T/P
4HE-ODELWILLRESPOND “Tone” to indicate that tone dialing
is enabled, or “Pulse” to indicate that pulse dialing is on and
enabled.
2EPEATKEYSEQUENCETOSWITCHBETWEENSETTINGS
6SHFLDO'LDOLQJ
4HE-ODELHASPROVISIONSFORSPECIALDIALINGSEQUENCES
Special dialing sequences allow:
s$IALINGTHATREQUIRESANACCESSNUMBERTOCONNECTWITHAN
outside line.
s$IALINGTHATREQUIRESTHEPOUNDORSTAR
s$IALINGTOABEEPERORPAGER
6SHFLDO'LDOLQJ.H\V
4HEFOLLOWINGDESIGNATEDKEYSREPRESENTSPECIALFUNCTIONSWHEN
USEDWITH0(/.%.5-"%2ENTRIES
1. Pause
OUTPUT
PAUSE
AM
0!53%REPRESENTSATWOSECONDPAUSEINDIALING)TCANBEUSED
when an access number is required before dialing to an outside
LINE&OREXAMPLEINSOMECASESAhvOROTHERNUMBERMUSTBE
DIALEDFIRSTINORDERTOGETADIALTONEFORANOUTSIDELINE