Sensaphone 800 - Page 65

Sensaphone
®
Model 800 User’s Manual
64
,QWHUURJDWLQJ,QWHUFDOO7LPH
4OINTERROGATE)NTERCALL4IME
0RESS7(!4)3
WHAT
IS
0RESS).4%2#!,,4)-%
3
INTERCALL
TIME
4HE-ODELWILLRECITETHEPROGRAMMED)NTERCALL4IME
0D[LPXP1XPEHURI&DOOV0D[&DOOV
4HE-AX#ALLSFEATURECONTROLSTHETOTALNUMBEROFREPEATED
calling attempts by the Model 800 in the event of an alarm. When
ANALARMOCCURSTHEDIALOUTPROCESSBEGINSANDCONTINUESTO
cycle through your programmed telephone numbers until the
ALARMISACKNOWLEDGEDORUNTILTHEMAXIMUMNUMBEROFCALLSIS
REACHED4HE-AX#ALLSSETTINGREGULATESTHENUMBEROFCALLSTHAT
will be made as a result of any alarms; if more than one alarm is
DETECTEDATONCEORIFASECONDALARMOCCURSDURINGDIALOUTON
THEFIRSTALARMTHE-AX#ALLSSETTINGWILLSTARTTHECALLINGPROCESS
from zero, until the programmed number of calling attempts are
completed.
4HEDEFAULTSETTINGFOR-AX#ALLSISBUTITMAYBE
PROGRAMMEDFROMTOCALLS-AX#ALLSISCANCELLEDWHEN
ANALARMISACKNOWLEDGED)FTHEMAXIMUMNUMBEROFCALLSIS
completed and no alarm acknowledgement has occurred, the
Model 800 will automatically acknowledge any alarm and stop the
DIALOUT
NOTE
If only one telephone number is programmed, the
-ODELWILLDIALOUTAMAXIMUMOFTIMESTO
REPORTANALARMINACCORDANCEWITH&##RULES
3URJUDPPLQJ0D[&DOOV
4OPROGRAM-AX#ALLS
0RESS3%4
SET