Sentry Sample Sequencer 5 - Page 28

Sentry Equipment Corp | Sample Sequencer

5
22 SPD 5.5.15
5.2.10 Password Setup
If desired, the Sample Sequencer can be password protected. Password settings are changed
on the Password Setup Screen
Figure 15: Password Setup Screen
Select the blue button to toggle between Enabled and Disabled for password protection. When
Enabled is selected, the current password will be displayed. To change the password, simply
touch the password, and a keypad will appear. Use the keypad to enter a new password. Select
the enter button when finished to return to the Password Setup Screen. Press the save button to
save the changes made on this screen. To return to the previous screen without saving, press
the escape button.
5.2.11
Clock
The Sample Sequencer contains a real time clock that provides the time and date stamp for the
data logger. The real time clock is set from the Set Date Screen.
Figure 16: Set Date Screen
The top time displayed is the current time on the system. To change the time, change the “Set
Time to:” settings by pressing the area you wish to change. For example, to change the month,
touch the month area of “Set Time to.” Once you have the correct time in the “Set Time to” area,