Sentry Sample Sequencer 5 - Page 38

Sentry Equipment Corp | Sample Sequencer

5
32 SPD 5.5.15
5.2.26 Analyzer Names
To name each analyzer, use the Analyzer Names Screen.
Figure 31: Analyzer Names Screen
Figure 32: Analyzer Names Keypad
To update analyzer names:
7. Touch the name area of the analyzer you wish to update.
8. Enter the analyzer name using the keypad that appears.
9. When you have completed the analyzer name, touch the enter button in the lower right
hand corner. This will enter the analyzer name you have created on the Analyzer Names
Screen.
10. Repeat this process for each analyzer name you would like to change.
11. When finished, touch the save button to save all analyzer names, or touch the escape
button to return to the previous screen without saving.