SolaStat™-1-3 Installation Guide
Version 1.1 – April 2013 Page 10
POWERING UP
Before you
Connect the
Power
Before you power up, make sure you have
Read the safety instructions, warnings and liability statements,
Completed installation, and
Securely mounted the unit in place before you connect power to the unit.
Checked that no water, metal shavings or other electrical hazards are
anywhere near the plug, socket and/ or surrounding environment
Notes:
The Power outlet socket must be installed by a registered electrician
The SolaStat™ must be installed by a qualified installer.
Ensure suitable over-current protection and RCD Protection for the
SolaStat™ is in place.
Continued on next page
To Next Page
Loading...
