SolaStat™-1-3 Installation Guide
Version 1.1 – April 2013 Page 20
PROGRAMMING THE SOLASTAT™, CONTINUED
Adjust the
PUMP OFF
Temperature
The PUMP OFF Temperature determines the temperature at which the pump
will be turned off, to allow the water in the cylinder to heat up fully (i.e. make
sure that the warmer water in the cylinder is not diluted with colder water).
The Standard Value is 6°C [10°F], and the range is 1°C – 20°C [33.8°F –
68°F]
Note: Further information on PUMP OFF Settings is included on pages 16-
17 under About the Pump Settings.
Continued on next page
The Display will flash ‘6’ to
show the PUMP OFF value
in °C.
Adjust the PUMP OFF value using the +
and – keys.
Then press NEXT to programme the
next value.
The PUMP light
flashes.
To Next Page
Loading...
