Separ Filter SWK-2000 - Page 11

Dok.-Nr.: D10029.EN Rev.: 11 Page 11 of 30
Manual: Water separator / Fuel pre-filter SWK-2000
Willibrord Lösing
Filterproduktion GmbH
W. Lösing Filterproduktion GmbH • Am Walzwerk 2 • 45527 Hattingen
Using the example of the SWK-2000/40/M/H:
Example of a filter element:
The filter shown here may differ from your purchased filter. The actual appearance and arrangement
of the components depends on the configuration of the filter you have chosen.
Filter lid
Filter housing
Bleed screw
Mounting
surface
Mounting hole
Fuel inlet
(similar to the left filter side)
Fuel outlet
(similar to the left filter side)
Bowl
2 sealed ports for water in fuel sensors
Drain valve
Heating electronics
(optional)
Connector for
heater
Socket for heatercontrol. Note to be
connected before heater plug
Grounding point
top
bottom
Handle
as replacement aid