Sepura SC20 series Quick Start Guide

To select a talkgroup:
1. From the Home Screen, press the Groups key. The current selected
folder and talkgroup appear in the talkgroup selection box.
Tip: If you want to change to another talkgroup within the same
folder, simply enter the number of the talkgroup, or select the All
Folder which contains all the talkgroups and enter the number of
the talkgroup.
2. Use the Left and Right navigation keys to move between folders at the
same level. Use the Up and Down navigation keys to move between
the folder levels (sub-folders).
Rotate the Navi-knob to scroll through the talkgroups within the
currently selected folder. The directional arrows under the talkgroup
name indicate the rotational direction of the Navi-knob.
3. Press the Select context key to attach to the talkgroup.
Folder Selection Mode
If your radio is customised for Folder Selection Mode, you must select a
folder, and the selected talkgroup within that folder becomes your
requested talkgroup when you make a call.
You can change the selected talkgroup within the folder (if the talkgroup
is editable) and change the selected folder at any time. You cannot select
the DGNA, Always Attached, Background or Smart Call folder as your
selected folder. You can only select a talkgroup that is editable.
22
SC20 series – 07/2017

Sepura SC20 series Specifications

General

Operating Temperature	-30°C to +60°C
Frequency Bands	380-430 MHz
GPS	Integrated GPS, GLONASS
Bluetooth	Bluetooth 4.0
Security	TEA1, TEA2, TEA3
Transmit Power	1W, 3W, 10W
Battery Life	Up to 14 hours (standard battery)