Serta Motion Essentials V King - Flipping and Securing the Base; Power Connection and Setup Check

9
installaon guide
STEP 7
STEP 8
STEP 9
STEP 10
Carefully ip the base over onto its legs.
Important: Always use two people when seng up, moving or ipping the
base. Do not drag across the oor. Do not rest frame on its side, excessive
pressure may damage the legs.
Setup is now complete! Test all funcons on remote.
Insert each end of the maress retainer bar into the holes at the foot
of the base. Make sure the bar is secured.
For customer support, visit www.ergomoon.com or call: 1-888-550-3746
WARNING
Always unplug the base from the electrical outlet before servicing any part of the
base. To reduce risk of electric shock, unplug the base before cleaning.
To safely disconnect, ensure the base is in a at posion with all motors o,
and unplug from power source.
Plug the base into a power
source. A surge protector is
strongly recommended.
Ensure baeries are correctly installed in the back of
the remote.
Quickly test funcons to verify proper setup before
placing maress on base. Press FLAT to return the
base to a at posion.