Serta Motion Essentials V King - Connecting Strap (Optional); Securing Split Bases

12
With the bases in their desired locaon, slightly loosen both legs to
allow the strap to t on the leg bolt, between the leg washer and frame.
Slide side (a) of the connecng strap onto leg bolt. Swing the strap
and connect side (b) to the leg bolt. Secure the strap by shiing to
the le.
Re-ghten legs. Do not over ghten. Use the remaining strap and repeat
on other end of the base.
STEP 2
STEP 1
STEP 3
connecng strap (oponal)
a
b
If any split setup is being installed (excluding Divided King), plasc connecng straps are provided
(one per base) to secure the bases together. Use both straps to secure the head and foot porons together.