Serta Motion Essentials V King - Pair Remote; Remote Pairing Procedure

11
Unplug the Power Cord from your power outlet. Wait 1 minute, then
plug it back in to your power outlet. Perform Step 2 within 10 seconds,
while the control box light is ashing.
The remote is now paired to the adjustable base. Test all remote
funcons. If the remote buons do not impact the adjustable base
movements, please repeat the process again.
pair remote
Press and hold the PAIR buon on the
back of the remote. The PAIR buon
will illuminate and start to ash. When
the PAIR buon stops ashing, the
LED light on the control box will stop
ashing. Release the PAIR buon.
STEP 1 STEP 3
STEP 2
The original remote that comes in the box is already paired to the adjustable base. No further acon is required. In
the event that the remote is not paired with the base, follow the steps below.
Power Cord
Power Supply