EasyManua.ls Logo

Serta Pivot - Emergency Power Down Feature; Battery Installation and Operation

Serta Pivot
16 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
10
CUSTOMER SERVICE: 800-695-2540
Emergency Power Down Feature
Your Serta
®
Pivot™ Foundation has an
emergency lowering feature in the event that your
base is in the raised position and has lost power
due to a power outage.
STEP 1
Locate and remove the cover for the 9 volt batteries.
STEP 2
Install two (2) alkaline 9 volt batteries. (Not included.)
Figure 1: 9 volt batteries cover.
Figure 2: Install 9 volt batteries.
STEP 3
Replace the battery cover.
Figure 3: Replace battery cover.
STEP 4
Press the “FLAT” button (B) or the “HEAD DOWN”
button (C) to lower the foundation to at position
during a power outage.
Figure 4: Lower the bed using the 9 volt battery backup system.
Your bed should lower to the at position.
NOTE: The two (2) 9 volt batteries are only intended to be used
once. After you complete the emergency lowering, the batteries
need to be replaced with new alkaline batteries.
A
B
C

Related product manuals