Serta Pivot - Wired Remote Control Operation; Remote Control Functions

11
CUSTOMER SERVICE: 800-695-2540
Wired Remote Control Operation Guide
A. HEAD UP
B. FLAT
C. HEAD DOWN
HEAD ADJUSTMENT (A, C)
• Adjusts the head section to the desired
positions.
BED “FLAT” BUTTON (B)
• Levels the bed to the at position when the
button is pressed and held.
NOTE: The “FLAT” cycle can be interrupted and
cancelled by releasing the FLAT button (B).
Notice:
Changes or modications not expressly
approved by the party responsible for
compliance could void the user’s authority to
operate the equipment.
Important Note
• To comply with the FCC RF exposure compliance
requirements, no change to the antenna or the
device is permitted. Any change to the antenna or
the device could result in the device exceeding the
RF exposure requirements and void user’s authority
to operate the device.
A
B
C