8
CUSTOMER SERVICE: 800-695-2540
Parts List
NOTE: Before discarding any packing
materials, check the adjustable bed
frame carton and verify the following
items in the parts list are included:
Serta
®
Pivot™ Foundation
PARTS LIST
A. Wired Remote E. Allen Key (1)
B. Mattress Retainer Brackets: (1) Left, (1) Right F. Owner’s Manual
C. Retainer Bar Bolts (4) * G. Y-Cable (Included in Twin XL & Split California King Foundations Only)
D. Retainer Bar Washers (4) *
* Pre-installed at foot of bed
IMPORTANT UNPACKING INSTRUCTIONS
To avoid damage to the adjustable foundation,
always open the carton while the bed
is laying in the FLAT position on the oor.
OPEN FLAT
STEP 1
Carefully lift the bed frame unit out of the shipping
carton, keeping the unit top side down. For safety
reasons, this should be performed by 2 people.
STEP 3
Remove and extend the power cord from the frame.
WARNING:
POWER CORDS MUST NOT INTERFERE WITH
ANY ADJUSTABLE BED MECHANISMS.
STEP 2
Remove the plastic packaging.
Power Down
Feature
Frame Assembly Instructions
To Next Page
Loading...
