EasyManua.ls Logo

Serta Pivot - Electrical Connection and Usage Guidelines

Serta Pivot
16 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5
CUSTOMER SERVICE: 800-695-2540
SAFETY PRECAUTIONS
This product is for use on a standard 120-volt circuit, and has a grounding plug that looks like the
plug illustrated in photo A (see Figure). A temporary adapter that looks like the adapter illustrated in
photo B and C able to be used to connect this plug to a 2-pole receptacle as shown in photo B if a
properly grounded outlet is not available. The temporary adapter should be used only until a properly
grounded outlet (photo A) can be installed by a qualied electrician. The green colored rigid ear, lug
or the like extending from the adapter must be connected to a permanent ground such as a properly
grounded outlet box cover. Whenever the adapter is used, it must be held in place by a metal screw.
This product is for use on a circuit having a standard rating of 120 volts and is factory equipped with a
specic electric cord and plug to permit connection to a proper electric circuit. Make sure that the product
is connected to an outlet having the same conguration as the plug. No adapter should be used with this
product. If the product must be reconnected for use on a different type of electric circuit, the reconnection
should be made by qualied service personnel.
Unauthorized modications could void the electrical portion of your warranty. Failure to use a properly
grounded outlet for this product or modication of the plug will compromise this important grounding safety
feature and may result in electrical shock, electrical re, or faulty operation of the product.
FOR BEST RESULTS, YOUR ADJUSTABLE BED BASE SHOULD BE PLUGGED INTO A SURGE
PROTECTOR (not included).
WARRANTY PRECAUTION:
Do not open control box, motors or remote controls (with the exception of the battery
compartment if equipped). The warranty is void if these units are tampered with. Any
repair or replacement of adjustable bed base parts must be performed by an authorized
technician.
IN-HOME USE AND HOSPITAL DISCLAIMER:
Your adjustable bed base is strictly designed for in-home use only. It is NOT designed for
hospital use and is NOT designed to meet hospital standards. Do not use this bed with
TENT TYPE oxygen therapy equipment or near explosive gases.
WARNING!
DO NOT USE NEAR PEOPLE USING OR WEARING MEDICAL DEVICES.
FOR HOUSEHOLD / RESIDENTIAL USE ONLY. DO NOT USE OUTDOORS.
This product conforms to UL STD 962

Related product manuals