serva Blue Series - 4.3 Prepare Electrode Wicks

7
standard gel format large gel format
To disperse, slide a gel bent into a U-shape from side to side. The sides of the gel
are then gently lowered. Avoid air bubbles between the cooling plate and gel. Excess
cooling fluid from around the gel is removed using a lint-free tissue.
4.3 Prepare Electrode Wicks
4.3.1 SDS Gel Kit, CleanGel, HPE Gel
All buffers needed are provided in the SERVA Gel and Buffer Kits. We do not
recommend different or self-made components.
Electrode wicks, soaked in an appropriate buffer, provide a convenient alternative to
buffer tanks. The wicks should be fully soaked with 45 ml buffer for at least 10
minutes. The wicks should be rolled to remove air bubbles and to distribute the buffer
evenly using the supplied roller:
Electrode wicks are applied with the cathode (white) at the front, anode (blue) at the
back. Remove excess electrode buffer from the wicks by tilting the electrode wicks
along one long edge and dab it on the paper pool bottom. When moving the wicks
DOMINIQUE DUTSCHER SAS