Server Technology PRO2 - Page 215

PRO2 User Guide
Chapter 8: Using the Command Line Interface (CLI)
• 215
Command Syntax
set tacacs primary <hostname>
set tacacs secondary <hostname>
set tacacs port <port>
set tacacs key {key}
Parameters
The set tacacs command uses the following parameters:
Command Access
Command Syntax
set tacpriv access [admin | ononly | poweruser | rebootonly | user | viewonly] <priv level>
set tacpriv sysmon [disabled | enabled] <priv level>
Parameters
The set tacpriv command uses the following parameters:
Sub-Parameters
The set tacpriv command uses the following sub-parameter:
Command Access