Server Technology Switched Rack PDU - Page 124

124  Advanced Operations Switched PDU
Installation and Operations Manual
Displaying LDAP group access:
The List LDAPGroup command displays all access rights for an LDAP group.
To display LDAP group access:
At the Switched CDU: prompt, type list ldapgroup, optionally followed by a group name. Press Enter.
Example
The following command displays information about the LDAP group PowerUser:
Switched CDU: list ldapgroup poweruser<Enter>
Username: PowerUser
Outlet Outlet
ID Name
.A1 DataServer_1
.A2 WebServer_1
Groups:
ServerGroup_1
ServerGroup_2
More (Y/es N/o): Y
Ports:
Port Port
ID Name
Console Console
Members of the PowerUser LDAP group can access the following outlets, outlet groups, and serial ports: outlet A1
which has a descriptive name of DataServer_1, outlet A2 which has a descriptive name of WebServer_1, group
ServerGroup_1 group ServerGroup_2 and Console serial port.