Server Technology Switched Rack PDU - Page 130

130  Advanced Operations Switched PDU
Installation and Operations Manual
Deleting outlet access for a TACACS+ account:
The Delete OutletFromTACACS command removes a TACACS+ account’s access to one or all outlets. You cannot
remove access to any outlet for an administrative level account.
To delete outlet access for a TACACS+ account:
At the Switched CDU: prompt, type delete outletfromtacacs, optionally followed by an outlet name and a
TACACS+ account number. Press Enter, or
Type delete outletfromtacacs all, followed by a TACACS+ account number and press Enter.
Adding outlet group access to a TACACS+ account:
The Add GroupToTACACS command grants a TACACS+ account access to an outlet group. To grant access for
more than one outlet group, you must use multiple Add GroupToTACACS commands.
To grant outlet group access to a TACACS+ account:
At the Switched CDU: prompt, type add grouptotacacs, optionally followed by an outlet group name and a
TACACS+ account number. Press Enter.
Examples
The following commands grants to a TACACS+ account number 5 access to the outlet groups ServerGroup_1 and
ServerGroup_2:
Switched CDU:add grouptotacacs servergroup_1 5<Enter>
Switched CDU:add grouptotacacs servergroup_2 5<Enter>
Deleting outlet group access for a TACACS+ account:
The Delete GroupFromTACACS command removes a TACACS+ account’s access to an outlet group. You cannot
remove access to any group for an administrative level account.
To delete outlet group access for a TACACS+ account:
At the Switched CDU: prompt, type delete groupfromtacacs, optionally followed by a outlet group name and a
TACACS+ account number. Press Enter.
Adding serial port access to a TACACS+ account:
The Add PortToTACACS command grants a TACACS+ account access to the serial port.
To grant serial port access to a TACACS+ account:
At the Switched CDU: prompt, type add porttotacacs console and a TACACS+ account number. Press Enter.
Deleting serial port access for a TACACS+ account:
The Delete PortFromTACACS command removes a TACACS+ account’s access to the serial port. You cannot
remove access to the serial port for an administrative level account.
To delete serial port access for a TACACS+ account:
At the Switched CDU: prompt, type delete portfromtacacs console and a TACACS+ account number. Press Enter.