64 Operations Switched PDU
Installation and Operations Manual
Deleting group access for a user:
The Delete GroupFromUser command removes a user’s access to a group. You cannot remove access to any group
for an administrative level user.
To delete group access for a user:
At the Switched CDU: prompt, type delete GroupFromUser, optionally followed by a group name and a username.
Press Enter.
Adding serial port access to a user:
The Add PortToUser command grants a user access to the serial port.
To grant serial port access to a user:
At the Switched CDU: prompt, type add porttouser console and a username. Press Enter.
Deleting serial port access for a user:
The Delete PortFromUser command removes a user’s access to the serial port. You cannot remove access to the serial
port for an administrative level user.
To delete serial port access for a user:
At the Switched CDU: prompt, type delete portfromuser console and a username. Press Enter.
Displaying user outlet, group and serial port access:
The List User command displays all accessible outlets, groups and serial ports for a user.
To display user outlet, group and serial port access:
At the Switched CDU: prompt, type list user, optionally followed by a username. Press Enter.
Example
The following command displays information about the user JaneDoe:
Switched CDU: list user janedoe<Enter>
Username: JANEDOE
Outlet Outlet
ID Name
.A1 DataServer_1
.A2 WebServer_1
Groups:
ServerGroup_1
ServerGroup_2
More (Y/es N/o): Y
Ports:
Port Port
ID Name
Console Console
JaneDoe can access the following outlets, groups and serial ports: outlet A1 which has a descriptive name of
DataServer_1, outlet A2 which has a descriptive name of WebServer_1, group ServerGroup_1 group ServerGroup_2,
and Console serial port.
To Next Page
Loading...