Switched PDU
Installation and Operations Manual Advanced Operations 99
Enabling or disabling custom user certificates:
The Set SSL User Certificate command enables or disables uploading of custom user certificates.
To enable or disable user certificates:
At the Switched CDU: prompt, type set ssl usercert, followed by enabled or disabled, and press Enter.
Setting the custom user certificate passphrase:
The Set SSL User Passphrase command sets the user-defined passphrase for authentication of uploaded custom
user certificates.
To set the user certificate passphrase:
At the Switched CDU: prompt, type set ssl userpass and press Enter. You will be prompted to provide the passphrase.
Press Enter.
NOTE: A restart of the PDU is required after setting the user certificate passphrase.
SSL Technical Specifications
Secure Socket Layer (SSL)
Transport Layer Security (TLS) version 1 (RFC 2246)
SSL/TLS-enabled HTTPS server (RFC 2818)
Self-Signed X.509 Certificate version 3 (RFC 2459)
Asymmetric Cryptography:
1024-bit RSA Key Exchange
Symmetric Cryptography Ciphers:
TLS_RSA_WITH_AES_256_CBC_SHA TLS_RSA_WITH_3DES_EDE_CBC_SHA
TLS_RSA_WITH_AES_128_CBC_SHA TLS_RSA_WITH_DES_CBC_SHA
To Next Page
Loading...