Need help?Do you have a question about the Sesamo LIGHT MILLENIUM and is the answer not in the manual?
Details manufacturer's compliance with Machine Directive 98/37/CE.
Fastening carriages to wings according to specified quotas.
Attaching wings and positioning the anti-derailment device.
Adjusting wing position on three axes for proper alignment.
Procedure to adjust wing position along the Po axis.
Installing amplifier module and configuring beam settings.
Connecting photocell beams to the internal amplifier board.
Setting system working model using jumpers for Millenium/external amplifiers.
Using dip switches S1/S2 to set parameters like wing weight and modes.
Enables manual control of door movement for opening and closing.
Details operation during power failure using battery backup.
Explains jumper settings for motor power, cyclic opening, and key signal types.
Steps for powering unit, resetting limits, and performing initial operational checks.
Connecting two automatisms for synchronized operation and setting master/slave.
Troubleshooting guide for error codes, LED indicators, and corrective actions.
Final installation steps: cover closing, label application, and certificate handling.
General| Brand | Sesamo |
|---|---|
| Model | LIGHT MILLENIUM |
| Category | Door Opening System |
| Language | English |
To Next Page
