What to do if Sesamo smart PRO Door Opening System door remains open?
If the Sesamo Door Opening System door remains open, here are a few things to check: * If 'Op Steady' is indicated, the logic selector might be on the stop open position. Change the logic position. * An opening control might be inserted (e.g., start1/start2/photocell/emergency opening). Check the respective inputs. * There might be an obstacle. Remove it.
Why Sesamo smart PRO door does not open but automation tries to open?
If the Sesamo Door Opening System door doesn't open even when the automation is running, and you see 'OP followed by St followed by CL', it could be due to: The lock or electric lock not working. Check and release it. Also, verify if the parameter of the electric lock is set correctly.
What to do if Sesamo smart PRO Door Opening System door reverses during the closing phase?
If the Sesamo Door Opening System door reverses while closing and 'Op flashing' is indicated, it might be because: * The movement of the door activates the safety closing sensor. Check and/or calibrate the sensor. * Friction activates the reversal of the movement. Eliminate the friction.
What to do if Sesamo Door Opening System door does not open/start the acquisition of Lp parameters?
If the Sesamo Door Opening System door doesn't open or start acquiring Lp parameters, and 'St steady' is indicated, it could be due to: * A key contact being inserted. Check the contact key. * The opening safety sensor being activated. Check the sensor or remove any object.
Why Sesamo Door Opening System door stops during opening cycle and then closes?
If the Sesamo Door Opening System door stops during opening and then closes, and 'Op flashing followed by Cl flashing' is indicated, it's likely that friction is causing the stop and subsequent reversal. Try to eliminate any friction present.
Guidelines for environmentally responsible product disposal and recycling.
Settings for Low-Energy application compliance as per EN16005 standards.
Essential checks before starting the automatism installation process.
Formal declaration confirming the product's conformity with relevant EU directives.
How to adjust the brake level to control closing speed based on door weight.
Guide for connecting and using the advanced selector for logic selection and control.
Instructions for cleaning different parts of the operator.
General| Connectivity | Bluetooth |
|---|---|
| Compatibility | iOS, Android |
| Power | Rechargeable battery |
| Features | voice control |
| Battery Life | Up to 6 months |
| Remote Access | Yes |
| Color | Silver |
| Installation | DIY installation, fits standard doors |
To Next Page
