Sesamo LIGHT MILLENIUM - Page 7

Vertical cross-piece positioning must occur so that the
indications in the formulas in:
Fig.6 if standard wing profiles are used;
Fig.7 if Sesamo mod. SMALL wing profiles are used;
Fig.8 if Sesamo mod. MAGNUM wing profiles are used.
For the abbreviations found in Fig.6, Fig.7 and Fig.8 refer
to the following table::
Installation Instruction
7
LIGHT MILLENNIUM
HAF : Fixed wing height
HAS : Sliding wing height
HCa : Automation box height
HCo : Automation cover height
Fig. 6 - Standard wing profiles
Standard
wing profiles
(Fig.6)
Sesamo
SMALL
wing profiles
(Fig.7)
Sesamo
MAGNUM
wing profiles
(Fig.8)
HAS = HAF + 17 mm HAF + 22 mm HAF + 6 mm
HCa = HAF + 47 mm HAF + 54 mm HAF + 44 mm
HCo = HAF HAF + 7 mm HAF - 3 mm
Fig. 7 - Sesamo SMALL wing profiles Fig. 8 - Sesamo MAGNUM wing profiles