EasyManuals Logo

Setra Systems DATUM 2000 User Manual

Setra Systems DATUM 2000
28 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #24 background imageLoading...
Page #24 background image
24
12.0 DATUM 2000 meter and manometer specications
Display
Type Light emitting diode
Color Red
Height of digits 0.56 inch
Maximum readout
Reading rate
-9999 to +31999
2 to 3 times per second depending on input voltage
Overload signal (over range reading) OVEr
Underload signal (under range reading) UndEr
Polarity sign Negative only
Brightness Constant
Cutout dimensions
Meter 1/8 DIN: 1.77 in. x 3.62 in. (45 x 92 mm)
Manometer 1/4 DIN: 3.54 in. x 3.62 in. (90 x 92 mm)
Front panel
Meter 3.85 in. x 1.99 in. (98 x 50 mm)
Manometer 3.85 in. x 3.74 in. (98 x 95 mm)
Accuracy (readout only)
At 73°F (23°C) ±0.01%R ± 1 digit
At 60°F to 95°F (16° to 35°C) ±0.04%R ± 1 digit
Analog output
Transducers Same as transducer output voltage
Transmitters
No analog output; the DATUM 2000™ terminates the
current loop
Physical
Operating temperature 32° to 130°F (0° to 55°C)
Storage temperature -40° to185°F(-40° to 85°C)
Width 3.59 inches (91mm)
Height
Meter
Manometer
1.74 inches (91mm)
3.50 (89mm)
Electrical data
Power
Domestic
24 VDC (115 VAC 60 Hz 12 watt adapter provided w/-1 models)
Power cord length 6 feet (approx.)
Depth (incl. connector)
7 inches (178 mm)
(Allow at least 1/2" more for wires attached to terminal strip)

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Setra Systems DATUM 2000 and is the answer not in the manual?

Setra Systems DATUM 2000 Specifications

General IconGeneral
BrandSetra Systems
ModelDATUM 2000
CategoryMeasuring Instruments
LanguageEnglish