Setra Systems Super II Supervisor And Technical Manual

EC Declaration of Conformity
The product manufacturer,
Setra Systems, Inc.
159 Swanson Road
Boxborough, Massachusetts 01719
U.S.A.
declares under its sole responsibility that the product,
Super II
TM
Electronic Weighing and Counting Scale
to which the declaration relates is in conformity with the following European
harmonized and published standards as of the date of this declaration;
EN61326 (CISPR 11, Group 1, Class B) Electronic Equipment for Measurement, Control,
and Laboratory Use EMC Requirements
EN55022/CISPR 16:1992 Radiated Emissions,
30 – 230 MHz, 30dBmV/m @ 10m
230-1000MHz, 37dBmV/m @ 10m
EN55022/CISPR 16:1992 Conducted Emissions,
150kHz - 0.5MHz 66-56dB(mV) QP, 56-46dB(mV) AV
0.5MHz – 5MHz 60dB(mV) QP, 50dB(mV) AV
5MHz – 30MHz 56dB(mV) QP, 46dB(mV) AV
EN61000-3-2:1995 Harmonized Emissions
EN61000-3-3:1995 Flicker Emissions
EN61000-4-2:1995 Electrostatic Discharge 4kV contact and 8kV
Air Discharge Performance Criteria B
EN61000-4-3:1996 Electromagnetic Field Immunity, 3V, 80%
AM Modulated at 1kHz, Performance Criteria A
EN61000-4-5:1995 Surges on AC Power Mains, 0.5kV Differential,
1kV Common Mode, Performance Criteria B
EN61000-4-6:1996 Conducted RF Current Injection on AC
Power Mains, 3Vrms, Performance Criteria A
EN61000-4-11:1994 Voltage Dips and Interuptions on AC Power
Mains, 0.5 Cycle Each Polarity, 100%
EN61010-1:1993 Safety Requirements for Electrical Equipment
for Measurement, Control, and Laboratory Use
These conclusions are based on test report:
EN61326: 1998 TEST Report for Setra Systems on the Super II Scale with Backlighting
Model(s)409
and
EN61326 (CISPR 11, Group 1, Class B) Emissions Testing Performed on the Setra
Systems Weighing Scale, Model 409, Super II with Backlighting Option
Technical Information File is maintained at:
Setra Systems, Inc.
159 Swanson Road
Boxborough, Massachusetts 01719
U.S.A.
Tel: (978) 263-1400
Fax: (978) 635-9551
Year of CE Marking: 2001
I do hereby declare that the product specified above conforms to the listed
directives and standards.
James J. Vecchio
Vice President
Weighing Systems Division
Setra Systems, Inc.
This Declaration of Conformity
is in accord
with European Standard EN 45014
General Criteria for Supplier’s
Declaration of Conformity.
The basis for the criteria can be found in
international documentation, particularly in
ISO/IEC, Guide 22, 1982, Information on
Manufacturer’s Declaration of Conformity
concerning standards and other technical
specifications.
This declaration is an
EC Type Declaration of Conformity
as referenced in article 10.1 of
EC directive 89/336/EEC
The EMC-directive
and as in Appendix III.B of
EC directive 73/23/EEC
The Low Voltage Directive

Setra Systems Super II Specifications

General

Brand	Setra Systems
Model	Super II
Category	Scales
Language	English