Supervisor Setup • Super II 28
SETUPS
MORE
SUPER
SETUP
abc reset
tare
menu remote
UNITS
ENABLED
MORE
Soft Key:
UNITS ENABLED
Selecting Weighing Units
This setup allows selection of units of measure available in the UNITS soft key menu in the User Functions
(See User’s Manual). In addition, the last unit of measure (GRAINS) is a user definable unit of measure,
sometimes referred to as ‘x’units. For the user definable unit, the conversion factor, the resolution and the
name of the unit can be customized.
Note: The factory default is to have all units available and the user definable unit set to GRAINS.
To access the UNITS ENABLED menu, either follow the menu tree or press the keys in the order listed
below:
GRAMS
1. To toggle the availability of a unit of measure, select that unit of measure. Units that are not available to the
user are shown in reverse video.
GRAMS OZ LBS DWT MORE
Enable/Disable units or Program
x units. Select from the menu below:
TROY OZ CARATS KG GRAINS GO BACK
Enable/Disable units or Program
x units. Select from the menu below:
To Next Page
Loading...
Need help?
General
