Introduction • Super II 7
TRANSAC Activate and choose the fields to record in the transaction log, print the
SETUP transaction log or transfer to a computer, and clear the transaction log.
ID NAME Change the names of the ID fields.
SETUP
MACRO Program up to ten macros (a series of scale operation steps) along with
SETUP customizable prompts.
SETUP Program password protection for the Supervisor menus
SECURTY
BEEPER Allows the beeper to be disabled.
CONTROL
Bases Menu:
CALIB Perform a Span calibration and access the factory linearity calibration and test
menu.
UPDATE Select the filtering and update rate.
SPEED
ZERO Set the level of Zero Tracking.
TRACK
RESOLUT Set the displayed weight resolution of the scale.
INFO Display information about the bases such as display resolution, zero
tracking, sample resolution, and software revision.
NAME Change the name of a base.
ADDRESS Display and change the network address of the bases.
BASERST Force the controller to evaluate the base network.
Technical Menu:
GREETNG Change the greeting message on power-up.
BACKLIT Set up the battery saving modes for the backlight option (if available).
SETUP Send setup and database information through the ports.
TRANSFR (Note: Available in Software Version 3.01.)
RESET Return to the factory defaults and clear out separately the Database, Print
Registers, and Macros.
AUTO Program automatic switching options among multiple bases.
SWITCH
To Next Page
Loading...
Need help?
General
