Technical Setup • Super II 78
Select the setups to transfer:
BASIC MACRO PRINT BASES GO BACK
SETUPS SETUPS SETUPS SETUPS
CONTRLLR ALL RECORDS MORE GO BACK
SETUPS SETUPS
Select setups to upload:
CONTRLLR ALL RECORDS MORE GO BACK
SETUPS SETUPS
Select setups to upload:
SETUPS
TECH
SETUP
MORE
SETUP
TRANSFR
abc reset
tare
menu remote
Soft Key:
SETUP TRANSFR
*
Transferring the Scale Setups to a Scale or Computer
The controller uses an interface language called the Setra Dialog Language (SDL). Using SDL, the setup
information can be transferred to another scale or to a computer file in order to back up the scale setups.
Through the SETUP TRANSFR menu, the entire scale setup, or a portion of the setups, can be sent out the BI
port.
To access the SETUP TRANSFR menu, follow the menu tree or press the keys in the order listed below:
The following screen and soft keys appear:
Pressing the MORE soft key will display the following additional choices:
Press the RECORDS soft key:
* Available in Software Revisions 3.01 and higher.
To Next Page
Loading...
Need help?
General
