Settop M1 - Receiver Configuration; Default Settings

SETTOPSURVEY, S.L. Bofarull 14, 08027 Barcelona (Spain) Phone: (+34) 93 340 05 73 Fax: (+34) 93 351 95 18 www.settopsurvey.com info@settopsurvey.com
17
Configuring the receiver
Default settings
The Settop M1 receiver comes with a default configuration to start a job easily.
The configuration of SETTOP M1 default state is:
•
Main user
 Username: admin
*
 Password: m1
*Note: This user is for web interface and caster services.
•
Configured as a GPS Rover
•
Station not connected
•
Wi-Fi configured in AD-HOC
 IP Address: 192.168.2.2
 IP Ethernet Adapter: 192.168.11.89
 DHCP Server: Enabled
•
Bluetooth without any link
•
Telephone not configured
•
Radio:
 Protocol: Trimtalk450s,
 Channel: 1 – 433075 Hz,
 Sensitivity: High sensitivity
 Power: 1W
•
System:
 Autopower: off
 Bridge: off
 Language: English