Need help?Do you have a question about the Settop M1 and is the answer not in the manual?
General| Type | Set-top box |
|---|---|
| RAM | 2GB |
| Operating System | Android |
| Video Output | HDMI |
| Audio Output | HDMI |
Configure as a base for sending differential corrections via radio or telephone.
Configure as a rover to receive differential corrections via radio or telephone.
Utilize for marine works or control center monitoring/static monitoring.
Details on GNSS channels, accuracy, latency, and output rates.
Overview of front panel connectors and LED indicators.
Description of rear panel connectors for radio, COM, phone, and satellites.
Details on the ON/OFF button and its functions.
Guidelines for operating temperature and IP rating.
Recommendations for optimal antenna location for clear sky view.
How to connect external power or internal battery for operation.
Default username, password, and network configuration.
Steps to configure the receiver using a Wi-Fi connection.
Steps to configure the receiver using a phone connection.
Displays current receiver status, coordinates, and firmware.
Access to various system configuration settings via icons.
How to interact with the receiver using the web interface.
Configure NMEA data output and sync pulse per second.
Connect and control a total station via USB or Bluetooth.
Configure Modem, Wi-Fi, and Ethernet network interfaces.
Pair and manage Bluetooth connections with total stations.
Configure radio protocol, channel, sensitivity, power, and output type.
Steps to check for and install the latest firmware.
Manage administrator and caster user accounts.
Options for rebooting the device and accessing internal settings.
Guide for setting up a simple base station.
Guide for setting up the device as a rover.
Setup for a reference base in infrastructure projects.
Configuration for marine surveying applications.
Setup for control center or static monitoring tasks.
Configuration for dynamic monitoring of structures.
Setup for guided mode control of cranes.
Troubleshooting steps for power and satellite reception problems.
Solutions for total station not responding or not linked.
Instructions for connecting to the Settop M1 using Windows 8.1.
To Next Page
