Need help?Do you have a question about the SEW-Eurodrive BST 0.6S-460V-00 and is the answer not in the manual?
General| Power | 0.6 kW |
|---|---|
| Installation altitude | up to 1000 m above sea level |
| Voltage | 460V |
| Frequency | 50/60 Hz |
| Ambient temperature | +40 °C |
| Storage temperature | -25 ... +70 °C |
| Relative humidity | max. 95 % (no condensation) |
Explains signal words and the structure of safety notes for clear hazard communication.
Provides general safety rules, personnel qualifications, and risk assessment requirements.
Details critical safety aspects during startup, operation, maintenance, and disposal.
Visual representation of the BST module and description of the Safe Brake Control (SBC).
Specifies requirements for installing the BST module and related wiring.
Outlines specifications for external safety controllers and relays.
Details requirements for supply, functional, and safety-related control cables.
Shows wiring for disconnecting single drives using MOVIDRIVE B.
Illustrates wiring for disconnecting drives using fieldbus interfaces.
Presents wiring diagrams for disconnecting group drives.
Details the safety characteristics and classifications according to EN ISO 13849-1.
To Next Page