Need help?Do you have a question about the SEW-Eurodrive INTERBUS UFI11A and is the answer not in the manual?
General| Brand | SEW-Eurodrive |
|---|---|
| Model | INTERBUS UFI11A |
| Category | Recording Equipment |
| Language | English |
Method for copying UFI11A settings using the UBP11A parameter module.
Arrangement of LEDs, connectors, and DIP switches on the UFI11A unit.
Notes on mounting and pin assignment for the fieldbus interface unit.
Procedures for configuring inverter parameters for operation with the UFI11A.
Enabling and using the Autosetup function for automatic configuration.
Steps to configure the INTERBUS fieldbus master software and settings.
Steps for initiating and operating connected inverters via INTERBUS.
Details on connecting the UFI11A to a PC via the UWS21A option.
Instructions for installing and using MOVITOOLS for UFI11A configuration.
Setting up the INTERBUS bus structure using the CMD Tool.
Configuring INTERBUS data length and PCP length using DIP switches.
Overview of PCP services for parameter setting and communication.
Explanation of return codes for parameter setting errors.
Procedure for starting up the UFI11A without a PC using the Autosetup function.
Response to a fieldbus timeout error and its self-resetting behavior.
Handling of SBus timeout errors and their impact on inverter status.
Detection and response to hardware defects in UFI11A fieldbus interfaces.
Meaning and troubleshooting for diagnostic LEDs UL, RC, BA, TR, and RD.
Example of controlling drive inverters via process data exchange.
Reading/writing parameters using INTERBUS PCP services.
Mechanism for writing parameters using object 8288.
To Next Page
