SEWOO LK-D10 - User Manual

All specifications are subject to change without notice
Mini Dot Impact Printer
MODEL : LK-D10

Summary

Printer Features

Printer Specifications

Overall Dimensions

Self Test Procedure

Configuration Setup

User Interface Controls

Panel Switches Operation

Explains the function of the FEED, BACK, and ON LINE buttons for printer operation.

Power Switch Function

Details the location and use of the power switch to turn the printer ON and OFF.

Status Indicators (LEDs)

Describes the patterns of the two LEDs indicating printer status and errors.

Command List

EPSON TM-U200 Emulation Commands

Lists command codes and descriptions for EPSON TM-U200 emulation.

CITIZEN IDP-3540 Emulation Commands

Lists command codes and descriptions for CITIZEN IDP-3540 emulation.

VERIFONE 900 Emulation Commands

Lists command codes and descriptions for VERIFONE 900 emulation.

STAR SP200 Emulation Commands

Lists command codes and descriptions for STAR SP200 emulation.

Printer Interfaces

Serial Interface Details

Describes D-SUB 25-pin, 9-pin serial ports and RJ-11 connector pinouts.

Parallel Interface Details

Describes D-SUB 25-pin and Centronics parallel port pinouts.

Cash Drawer Connector

Power Supply Requirements

Dip Switch Configuration

External Dip Switch Settings

Defines the function and settings for external DIP switches.

Internal Dip Switch Settings

Defines the function and settings for internal DIP switches.

SEWOO LK-D10 Specifications

General

Brand	SEWOO
Model	LK-D10
Category	Printer
Language	English