Need help?Do you have a question about the SEWOO LK-T12 and is the answer not in the manual?
Lists all items included in the printer box for user verification upon receipt.
Explains how to connect various cables (interface, peripheral, power) to the printer's connector panel.
Provides pinout diagrams and specifications for USB, Serial, Centronics, and Ethernet interfaces.
Describes the RJ-11 modular connector for cash drawers and its pinout.
Step-by-step guide on how to properly load thermal receipt paper into the printer.
Explains how to configure printer settings using DIP switches for communication and printing behavior.
Describes the buttons and LED indicators on the printer's control panel for status monitoring and operation.
Explains the meaning of different LED patterns displayed by the printer to signal status and errors.
Details printing method, speed, dot density, pitch, width, column count, roll paper, and weight.
Illustrates the printer's physical dimensions (width, depth, height) with measurements.
Provides specifications for the auto cutter, including cutting frequency, paper thickness, and cutter life.
Lists the available interface types: RS232, Centronics Parallel, USB, and Ethernet.
Specifies input voltage, current consumption during operation and standby, and power connector details.
Outlines operating and storage temperature and humidity requirements for the printer.
Details Mean Cycles Between Failures (MCBF), head life, and cutter life.
Lists the various certifications and compliance standards the printer meets (e.g., FCC, CE, UL).
General| Print Method | Direct Thermal |
|---|---|
| Print Resolution | 203 DPI |
| Print Width | 72 mm |
| Paper Type | Thermal Paper |
| Power | 24 VDC |
| Printer Type | Thermal Printer |
| Interface | USB |
| Power Supply | External Power Adapter |
To Next Page
