Need help?Do you have a question about the SGS GPBS520 and is the answer not in the manual?
Read manual, ensure clear space, avoid enclosed spaces.
Wear head, eye, and ear protection; use suitable work-wear.
Watch for thrown objects, ricochets, and ensure safe distance from others.
Gloves, hearing protection, eye protection, boots, and clothing requirements.
Avoid hazardous conditions and operating when impaired.
Check for obstacles, remove them, and inspect the unit before starting.
Place unit on flat ground, hold firmly, and ensure clear surroundings for starting.
Verify throttle function, use recommended materials, and maintain engine speed.
Address vibration, avoid hot engine parts, and disconnect spark plug for maintenance.
Avoid contact with power lines to prevent electrocution.
Diagram showing location of parts numbered 1 through 15.
Instructions for installing the upper and lower parts of the handle.
Steps to attach the cutting attachment guard to the gearbox.
Steps to install the metal blade using collar ring and nuts.
Steps to install the nylon spool and secure the line.
How to start, warm up, wear, and adjust the unit for operation.
Using the cutting guard, tapping for line advance, and cutter application.
Checking blade fastening, smooth rotation, and safe unit transport.
Understanding and preventing blade bounce for operator safety.
Procedures for fuel, spark plug, and cutting parts based on usage hours.
Spark plug tightening, muffler inspection, and air cooling vent cleaning.
Lubrication requirements for the angle transmission gears.
Instructions for refilling the nylon line spool with correct diameter line.
Procedure to adjust upper and lower blades for closer fit.
Guidelines for storing the unit and disposing of fuel, oil, or the machine.
Checks and probable causes for engine starting failure.
Checks and probable causes for engine not running or hard re-starting.
Illustrated diagram of engine components with numbered parts.
List of engine parts, their codes, and quantities.
Diagram showing various parts of the unit with corresponding numbers.
Comprehensive list of parts, their codes, and quantities.
Read manual, ensure clear space, avoid enclosed spaces.
Wear head, eye, and ear protection; use suitable work-wear.
Watch for thrown objects, ricochets, and ensure safe distance from others.
Gloves, hearing protection, eye protection, boots, and clothing requirements.
Avoid hazardous conditions and operating when impaired.
Check for obstacles, remove them, and inspect the unit before starting.
Place unit on flat ground, hold firmly, and ensure clear surroundings for starting.
Verify throttle function, use recommended materials, and maintain engine speed.
Address vibration, avoid hot engine parts, and disconnect spark plug for maintenance.
Avoid contact with power lines to prevent electrocution.
Diagram showing location of parts numbered 1 through 15.
Instructions for installing the upper and lower parts of the handle.
Steps to attach the cutting attachment guard to the gearbox.
Steps to install the metal blade using collar ring and nuts.
Steps to install the nylon spool and secure the line.
How to start, warm up, wear, and adjust the unit for operation.
Using the cutting guard, tapping for line advance, and cutter application.
Checking blade fastening, smooth rotation, and safe unit transport.
Understanding and preventing blade bounce for operator safety.
Procedures for fuel, spark plug, and cutting parts based on usage hours.
Spark plug tightening, muffler inspection, and air cooling vent cleaning.
Lubrication requirements for the angle transmission gears.
Instructions for refilling the nylon line spool with correct diameter line.
Procedure to adjust upper and lower blades for closer fit.
Guidelines for storing the unit and disposing of fuel, oil, or the machine.
Checks and probable causes for engine starting failure.
Checks and probable causes for engine not running or hard re-starting.
Illustrated diagram of engine components with numbered parts.
List of engine parts, their codes, and quantities.
Diagram showing various parts of the unit with corresponding numbers.
Comprehensive list of parts, their codes, and quantities.
To Next Page
General
