EasyManuals Logo

Shark DuoClean IC160UK Series User Manual

Shark DuoClean IC160UK Series
11 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #6 background imageLoading...
Page #6 background image
NOTE: To order replacement parts and filters, visit sharkclean.eu.
Replacement Pre-Motor Filter
and Frame
Replacement HEPA Filter
Perform maintenance on your HEPA filter once a year to keep your vacuum's suction power optimal.
IMPORTANT: Rinse HEPA Filter with lukewarm water ONLY. DO NOT use soap. Allow to air-dry for at least
24 hours before reinstalling. DO NOT scrub HEPA Filter.
Follow the previous instructions for removing filters. The Foam Filter should be replaced every
2.5 years, and the HEPA Filter should be replaced every 3 years, subject to frequency of use.
MAINTENANCE
CLEANING HEPA FILTER (ONCE A YEAR)
REPLACING FILTERS
1. Pull up on HEPA Filter access tab to remove.
2. Rinse filter with lukewarm water ONLY and leave
to air-dry at least 24 hours before reinstalling.
3. When dry, reinsert HEPA Filter and press down
until it clicks into place.
Note: Battery must be removed before HEPA Filter
can be removed.
P
u
l
l
t
o
A
c
c
e
s
s
H
E
P
A
F
i
l
t
e
r
HEPA
Filter
1. Slide down filter door release button.
2. Tilt filter door and lift o.
3. Remove filter from pod. Pull o foam filter.
4. Rinse foam filter and filter frame with lukewarm
water ON LY and leave to air-dry for at least
24 hours before reinstalling.
5. Once completely dry, reinsert foam filter on
filter frame.
6. Holding the pull tabs, push the filter back
into the pod.
7. Reinsert bottom of filter door into slots on
pod. Tilt door to close, pressing until it clicks
into place.
Perform regular maintenance on your filters to keep your vacuum's suction power optimal.
IMPORTANT:
To prevent damage, rinse filters with lukewarm water
ONLY
.
DO NOT
use soap. Allow filters
to air-dry for at least 24 hours before replacing them in the vacuum to prevent liquid from being drawn into
electricparts.
MAINTENANCE
CLEANING PRE-MOTOR FILTER (ONCE A MONTH)
Clean
Filters
Monthly
Filter
Frame
Foam
Filter
Filter
Door
Your vacuum comes equipped with three filters located on the vacuum pod: two pre-motor filters (one is a
filter frame) and one HEPA filter to capture and trap dust and debris.
10
sharkclean.eu
9
0800 862 0453

Other manuals for Shark DuoClean IC160UK Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Shark DuoClean IC160UK Series and is the answer not in the manual?

Shark DuoClean IC160UK Series Specifications

General IconGeneral
BrandShark
ModelDuoClean IC160UK Series
CategoryVacuum Cleaner
LanguageEnglish

Related product manuals