MAINTENANCE
EMPTYING THE DUST CUP
To remove Dust Cup, pinch and pull side tabs.
Tilt dust cup away from the vacuum cleaner, then
lift to remove.
To reinstall dust cup, place bottom into pod and
then tilt dust cup toward the wand until it clicks
into place.
Press lower button to open bottom of dust cup.
To remove collected debris from Lint Screen, press
top button and lift handle to open top of dust cup.
IMPORTANT: Remove the battery before performing any maintenance.
To remove, lift the handle on top of the battery and pull up.
Lint
Screen
VERSATILE FLOOR-TO-CEILING CLEANING
For cleaning carpets and hard floors. To activate
brushroll, step on floor nozzle and tilt handle back.
Use Powered Lift-Away to reach under furniture to
clean carpets and hard floors.
POWERED LIFT-AWAY
UPRIGHT
Use the wand in Lift-Away mode for more reach
when cleaning above-floor areas like coving or
skirting boards.
LIFT-AWAY® WITH WAND
Use the handle in Lift-Away mode for more detailed
cleaning of above-floor areas like upholstery,
window sills or stairs.
LIFT-AWAY WITH HANDLE
OPERATING THE VACUUM
ABOVE-FLOOR
Use the wand
in Above Floor
Mode for quick
jobs above
shoulder height.
With pod attached, detach the wand from the
floor nozzle.
Use the handle
in Above Floor
Mode for quick
jobs o the floor.
With pod attached, detach the handle from the wand.
ABOVE-FLOOR
NOTE: See previous page for instructions on how to detach the pod, wand and handle.
8
7
To Next Page
Loading...
