Shark EP780C - Getting Started with Assembly; Vacuum Cleaner Assembly

4 TOLL FREE: 1-800-798-7398
FIRST THING’S FIRST, YOU NEED TO
KNOW WHAT’S IN THE BOX YOU JUST
OPENED:
a Canister Vacuum
b Flexible Hose with Handle
c Upper Extension Tube
d Lower Extension Tube
e Floor Brush
f Combo Crevice/Dusting Tool
g Turbo Brush
Getting Started
a
c
e
g
b
f
d
YOUR SHARK
®
QUICK CLEAN CANISTER IS EASY TO
ASSEMBLE :
1 Place your vacuum canister on a level surface
DO NOT plug in the vacuum until it is fully assembled.
2 Insert the flexible hose (A) into the air intake duct. Push
it in until you hear it “click“, indicating that it is locked in
place. (Fig. 1)
3 Insert the upper extension tube (B) into the handle end of
the flexible hose. (Fig. 1).
4 Insert the lower extension tube (C) into the upper
extension tube. (Fig. 1)
5 Push the end of the extension tube into the floor
brush (D). (Fig. 1)
6 The combo crevice/dusting tool (E) is stored in the back of
the vacuum next to the power cord. (Fig. 1)
Assembly
Fig. 1
A
B
C
D
E
EP780C_42_IB_ENG_FRE_110418_1.indd 4 11-04-19 9:15 AM