Name: Shark ION ROBOT RV720 Series
Brand: Shark
Rating: 4 (1 reviews)

To Next Page

To Previous Page

21 221-800-798-7398 sharkclean.com

MAINTAINING YOUR SHARK ION ROBOT™ - cont’d�

CLEANING THE REMOVABLE FRONT WHEEL

The front caster wheel on your robot is equipped with sensitive

sensors and requires cleaning to maintain optimal function.

Frequently check the front wheel for any tangled hair or

wrapped debris. It’s important that this wheel can rotate and

spin freely.

1 To clean, pull the wheel from the robot housing.

2 Remove debris that may have built up around the shaft and

in the wheel cavity.

3 Wipe the sensors located in the cavity clean with a clean,

dry towel.

4 Remove any debris built up on the axel of the black and

white sensor wheel, you can pop this wheel off for easy

cleaning.

5 Reattach the black and white sensor wheel and reinsert the

caster assembly before use.Reattach the black and white

sensor wheel and reinsert the caster assembly before use.

REPLACING THE BATTERY

To remove the battery, turn the unit over and

unscrew the battery cover with a Phillips-head

screwdriver. Unplug the old battery from its

connector, then plug in the new battery. Replace

battery cover and screw it back into place.

Replacement batteries can be purchased at

sharkaccessories.com

CAUTION: Turn off power

before performing any

maintenance.

Questions and Answers:

Need help?

Do you have a question about the Shark ION ROBOT RV720 Series and is the answer not in the manual?

Shark ION ROBOT RV720 Series Specifications

General