Shark MESSMASTER VS100 Series User Manual

sharkclean.comsharkclean.com
USING YOUR MESSMASTER™
OPENING THE LID
CAPACITY
The dust cup has a dry debris capacity of 1
gallon and a wet debris capacity of 1/2 gallon.
When vacuuming wet or sloppy messes, do
not fill the dust cup above the Wet Debris
Max Fill line.
When debris reaches the Max Fill line, the
float mechanism in the dust cup will rise
automatically to cut o airflow. Suction will
cease and motor noise will become higher
in pitch. When this happens, turn o the
vacuum, unplug the power cord, and empty
the dust cup.
Wet Debris
Max Fill
1. Pull out the bottom of the latch to release,
then pull the latch down to unhook from
the lid.
2. To open the lid, lift it by the handle.
1 2
4. Press the base of the accessory
holder towards the Dust Cup
until it clicks into place.
5. Insert accessories into the slots
on the accessory holder until they
snap into place.
6. Neatly wrap the cord around the
unit handle for storage. Use the
cord clip on the plug to hold it
securely in place.
3. Insert the Accessory Holder into
the notch on the side of the unit.
2. Wrap the hose around the Unit Lid.
Clip the hose to the unit by sliding
the opening on the Hose Inlet down
onto the Hose Storage Hook until it
clicks into place.
1. Place the Main Unit on the floor. To
attach the Hose, insert the Hose
Connector into the opening on the
side of the unit and twist clockwise
to the lock symbol.
ASSEMBLY
1 2
3
5 6
4
(Insert)
(Twist)
(Click)
(Click)
(Snap)
(Insert)

Shark MESSMASTER VS100 Series Specifications

General

Brand	Shark
Model	MESSMASTER VS100 Series
Category	Vacuum Cleaner
Language	English