Shark MESSMASTER VS100 Series User Manual

sharkclean.comsharkclean.com
USING YOUR MESSMASTER™
SETUP
1. Press the power button to turn on the
vacuum.
2. Use the hose inlet for ANY mess.
3. For more specialized cleaning, add an
accessory by sliding it onto the hose inlet
until it connects securely (see Available
Accessories section for more information).
POWER BUTTON HOSE INLET
ADDING ACCESSORIES
1 2
3
USING YOUR MESSMASTER™
1. Insert an undamaged plastic bag to
line the inside of the dust cup. Push the
bottom of the bag down to the base of the
dust cup.
2. Tuck the bag edge between the Bag Guides
and Dust Cup Shelf.
3. Run any excess bag through the Bag Holder
Slot on the top of the accessory holder.
4. Close the lid to secure the bag in place.
The lid should clamp over the excess bag.
IMPORTANT: Unplug the power cord before opening the lid.
ANYBAG TECHNOLOGY™
The MessMaster can be used with or without
a bag.
Vacuuming without a bag
You can vacuum straight into the dust cup
without a bag. The dust cup is removable and
dishwasher safe.
Vacuuming with a bag
Utilize AnyBag Technology by inserting
any plastic trash bag (2 to 13 gallons) to
line the inside of the dust cup for easy
disposal of debris.
Note: Carefully inspect the bag for damage
or holes. DO NOT use a bag with holes. DO
NOT use a bag when vacuuming sharp or
industrial debris.
Bag Guides
Bag Holder Bag Holder
SlotSlot
Dust Cup Dust Cup
ShelfShelf

Shark MESSMASTER VS100 Series Specifications

General

Brand	Shark
Model	MESSMASTER VS100 Series
Category	Vacuum Cleaner
Language	English