Shark NV360 User Manual

11
www.sharkclean.com
Fig. 16
Suction
Release Collar
a
Above-Floor Cleaning
CLEAN ABOVE THE FLOOR IN UPRIGHT VAC OR
PORTABLE LIFT-AWAY
®
MODE
1 Press the handle release button and pull the
handle up or press the extension wand release
button and pull the extension wand up.
2 Attach desired accessory onto the end of either the
extension wand or the handle. (Fig. 16)
3 Your vacuum has tremendous suction
power. Adjust the amount of suction with
the suction release on the handle. Open
the valve (a) by rotating the collar 90˚
counterclockwise for low suction when
doing light jobs such as drapes or fine
surfaces. Close the valve (a) by rotating the
collar clockwise 90˚ for high suction and
when using the hand held power brush.
(Fig. 16)
4 Press the On/Off switch to the “I” position to turn
the vacuum on for above-floor cleaning.
IMPORTANT: Ensure vacuum is in upright
position. Do not use position “II” when cleaning
above the floor in the upright vac mode as this
will engage the motorized floor brush. The
rotating brush may damage your floor if run for a
prolonged period of time in one area.
Release suction when
dusting delicate objects,
furniture or draperies.
NV360_26_IB_E_121119_1.indd 11 12-11-19 8:59 AM

Shark NV360 Specifications

General

Style	upright vacuums
Color	blue
Floor Type	all floors, bamboo, bare floor, carpet, ceramic tile, concrete, cork, engineered woods, hardwoods, laminate, linoleum, marble, porcelain tile, rugs, tile, vinyl
Dust Bin Capacity	0.9 gallons
Cord Length	25 feet
Hose Length	5 inches
Carpet Height Adjustments	no
Automatic Cord Rewind	no
Filter	hepa
Washable Filter	yes
Pet Mode	yes
Hypoallergenic	yes
Brush Roll Shut-Off	no
Bagless	yes
Wet And Dry Cleaning	no
?leaning Area	9.5 inches
Brushes and Accessories	pet turbobrush, dusting brush, crevice tool, long-reach hose, motorized floor-brush nozzle
Voltage	120 volts
Current	10 amperes

Weight and Dimensions

Length	14.9 inches
Height	45.5 inches
Width	11.4 inches
Net Weight	15.96 pounds