14
MAINTAINING YOUR VACUUM
5. Tap o loose debris and wipe the brushroll
clean with a dry towel. Hand-wash the
brushroll if needed, using only water,
and then let it air-dry completely for at
least 24 hours.
6. When the brushroll is dry, reinstall by
inserting it into the nozzle until it clicks.
NOZZLE MAINTENANCE
POWERFIN FLOOR NOZZLE
1. Turn o the vacuum.
2. Press the nozzle release button to detach
the nozzle from the wand.
3. Press the brushroll release button and
slide the brushroll out of the nozzle.
4. Clear any blockages and remove any
debris from the brushroll and floor nozzle.
To Next Page
Loading...
