Shark PowerPro - Checking for Blockages

15
sharkclean.co.uk
Checking for Blockages in the Handheld Vacuum:
1. Turn o vacuum.
2. Remove the handheld vacuum from the wand.
3. Check all intake openings to the dust cup and
remove any debris or blockage.
CHECKING FOR BLOCKAGES
MAINTAINING YOUR VACUUM CLEANER
Checking for Blockages in the Wand:
Flexology® Wand:
1. Turn o vacuum.
2. Remove the handheld vacuum and floor nozzle
from the wand.
3. Check the clog access on the Flexology® portion
of the wand by pinching the tabs on either side of
the hose and lifting the hose out for wand access.
4. Clear any debris and blockages.
Checking for Blockages in the Floor Nozzle:
1. Turn o vacuum.
2. Detach the wand from the floor nozzle.
3. Press the brush roll release
button and slide the brush roll out of the nozzle.
4. Clear any blockages and release any debris
from the brush roll and floor nozzle.
5. Slide the brush roll back into the nozzle,
ensuring everything is lined up and in place