23 24
1-800-798-7398 sharkclean.com
To keep your vacuum’s
suction power optimal, follow
these instructions. Make
sure unit is off and cord is
unplugged.
MAINTENANCE
RECOMMENDED
FILTER CLEANING
SCHEDULE:
Pre-Motor Filter Kit
(Foam & Felt)
XFF680
Clean every 3 months.
Post-Motor Filter
(HEPA)
XHF680
Clean once a year.
EMPTYING THE DUST CUP
1 Pull up on dust cup
release latch and lift dust
cup off pod.
2 Hold dust cup over a
trash bin and press the
empty-release latch on the
bottom.
STEP 1 STEP 2
WARNING: To reduce
the risk of shock and
unintended operation,
turn power off and
unplug unit before
servicing�
Hand wash with
water only to prevent
damage from
cleaning chemicals�
Allow ALL filters
to dry completely
before replacing
in the vacuum to
prevent liquid from
being drawn into
electric parts�
IMPORTANT: Do not use
soap when cleaning the
HEPA filter.
3 Press top dust cup release
latch to access dust
screen and remove built-
up debris asrequired.
CLEANING THE FILTERS
1 Pre-Motor
(foam and felt):
With the dust cup
removed, take out and
rinse the foam and felt
filters with water. Tap
loose dirt off filters
between washes
asneeded.
2 Post-Motor (HEPA):
To access the HEPA filter,
reach under the grill and
pull the Filter Access
latch to remove the grill.
Remove and rinse the
HEPA filter.
STEP 3
HEPA
FELT FILTER
FOAM FILTER
FILTER FRAME
To Next Page
Loading...
Need help?
General
